Product introduction
Face recognition infrared temperature measuring all-in-one machine is an entrance guard product developed by using the latest facial mask detection algorithm and infrared array thermal imaging temperature detection technology. The system supports automatic switching in 1:1 and 1:n modes, runs on the Android system environment, with second-level speed of face recognition and temperature detection, no contact, high accuracy, high security, good stability and other characteristics.
Main features
1. Support face recognition with mask and temperature detection;
2. The built-in low-power temperature detection module completes the detection at the second level, the detection distance is 0.5m, and the temperature measurement accuracy is ±0.5℃;
3. Fast recognition, complete temperature detection in seconds, and record and push the data;
4. Support external qr code scanner, id card /IC card reader;
5. Support 1: N verification, 1: N in vivo detection to prevent photo and video attacks;
6.1: N pattern recognition accuracy is high, when the face database is 5000, the error rate is one part in ten thousand, and the pass rate is 99.85%;
7. Adopt dynamic face detection and tracking algorithm based on video stream;
8. Offline storage of 100,000 face photos and recognition records;
9. Support face recognition on-site photo saving;
10. Support serial port and wigan output, and support configuration of output content;
11.Support offline LAN device deployment and online HTTP transmission cloud deployment;
12. Support the light supplement at night with photosensitive sensing;
13. Support screen display content configuration and customize company name;
14. Support identification distance configuration.
15. It supports the reservation of visiting passenger plane, and the WeChat official develops the functions of self-service reservation of visitors and face registration of users
16. Support intece docking and customization;
Applicable scenario
Residential areas, office buildings, schools, institutions, tourist attractions, factory sites, etc
Specification
|
hardware |
|
|
CPU |
Quad-core cortex-a17 RK 3288 processor 1.8GHz |
|
memory |
RAM 2GB |
|
storage |
ROM 8GB |
|
operating system |
android 7.1.2 |
|
Display |
7 inch LCD screen, resolution: 1024* 600@60hz |
|
Appearance,material |
Aluminum shell, organic glazed panel |
|
performance |
|
|
Identify high |
1.2-2.2m |
|
Identify distance |
0.5-3m |
|
Temperature range |
0.5m |
|
Recognition technology |
Support mask recognition + infrared array thermal imaging temperature detection |
|
Face Angle |
L&R30°，U&D30° |
|
Recognition |
Near infrared in vivo detection, embedded visible light face recognition, adapt to most of the indoor and outdoor environment, can be quickly identified in the mobile |
|
recognition time |
Detection and tracking for 15ms, comparison for 80ms/ 1000, feature extraction for 300ms |
|
Status display |
Name broadcast display, custom information broadcast display |
|
face database |
10000（expandable） |
|
Main control board intece |
|
|
power intece |
1，External socket and a built-in 6P socket (with STB function) DC 12V input |
|
HDMI output |
1，support HDMI2.0的60 frames 4K*2K screen |
|
network intece |
1 RJ45 10M / 100M Adaptive Ethernet port |
|
Touch screen intece |
1 ETP input |
|
Extension intece |
1 UART ，1 RS485 |
|
Earphone /MIC intece |
1，External earphone audio output socket 2，(National standard: GND,MIC,R,L) |
|
WIFI |
1 WIFI signal, support 2.4G/5G WiFi,signal Wi-Fi 802.11b/g/n agreement |
|
3G/4G(optional) |
Extensible 1 channel of 3G(WCDMA、 EVDO、 CDMA、 GSM)/4G(LTE-TDD/LTE-FDD/TD-SCDMA/EDGE/GPRS/GSM)signal |
|
S Dcard intece |
Maximum expandable up to 64GBTF card |
|
USB2.0intece |
5，USB HOST (2 external, 3 built-in, external one for OTG) |
|
Open the output |
1 Open the output（Always open and always closed） |
|
Wiggins intece |
1 wiggins output |
|
Supplementary light signal |
1 Supplementary light signal output，1 Light sensing signal input |
|
camera |
|
|
camera |
2-megapixel, flat-angle wide dynamic camera with automatic white balance and automatic backlight optimization |
|
Pixel |
1920*1080 |
|
len |
1/3’Image sensor，4mm/6mm，F2.4 aperture |
|
Pixel Size |
2.2um X 2.2um |
|
Minimum illumination |
Color 0.05Lux @F1.2(ICR) |
|
SNR |
≥39db(AGC OFF) |
|
Wide dynamic range |
≥100db |
|
intece type |
USB2.0 |
|
Human body temperature measurement parameters |
The infrared thermal imaging module imported from Germany was used |
|
Thermal resolution |
32*32 |
|
Thermal imaging Angle（FOV） |
30°*30° |
|
Temperature measurement range |
30-45℃ |
|
Temperature measuring distance |
0.5m |
|
Temperature measurement accuracy |
±0.5℃ |
|
Card reading module (optional) |
|
|
Identification card type |
Read M1IC card serial number and id card serial number |
|
Radio frequency |
13.56MHZ |
|
Operating effective range |
<3cm |
|
Read rate |
15 time/s |
|
Id card module (optional) |
|
|
Standard specification |
It conforms to ISO/IEC 14443Type B standard, as well as "general technical requirements for reader of desktop resident identity card of ga450-2013", "technical specification for intece of security control module for verification of resident identity card of GA467", "general technical requirements for fingerprint collector of resident identity card of GA/ t1011-2012". |
|
Reading time |
<1s |
|
Read distance |
0-30mm |
|
Data intece |
USB |
|
power source specification |
USB |
|
Working frequency |
13.56MHZ±7KHZ（fc） |
|
Conventional parameters |
|
|
Working temperature |
-10℃ - +50℃ |
|
Working humidity |
10～90% Relative humidity, no condensation |
|
power supply |
DC12V/3A |
|
power |
≦25W |
|
equipment size |
218*116*22mm |
|
Equipment weight |
0.3kg（It varies depending on the configuration） |
|
installation |
Support wall - mounted and column - mounted installation |
Product picture and size
